FN Winchester Model 70 1-Piece Steel Trigger Guard, WSSM (Unfinished)

Production of the Winchester Model 70 started in 1935. It has gone through many changes over the years, but is currently still in production today.

The following information is critical MUST HAVE knowledge when ordering parts or wood for your Winchester Model 70.

1. When was your Model 70 produced?

   Production Type by Year of Manufacturer:

   1935-1963: Pre '64 Winchester Repeating Arms Company
   1964-2006: USRAC (U.S. Repeating Arms Co.)
   2008-Current: New Winchester Production

   While dating your Model 70 by serial number can be difficult, and there are many "legends" about why the historic serial number records for Winchester rifles and shotguns are not complete or why they are not always verifiable. A few reasons cited are:

   • A fire at the factory
   • Inadvertent destruction (during office cleaning)
   • Records simply lost in filing
   • Records misplaced between ownership transitions
   • Documents borrowed but not returned

   There is probably some kernel of truth to all of them. But the fact remains; there is no original, single, totally accurate database of serial numbers from 1866 forward that we are aware of. But perhaps this page can help you somewhat in your research.

   RECORDS AT THE FACTORY INDICATE THE FOLLOWING SERIAL NUMBERS WERE ASSIGNED TO GUNS AT THE END OF THE CALENDAR YEAR

   1935 - 1 TO 19 36 - 2238 37 - 11573 38 - 17844 39 - 23991 40 - 31675 41 - 41753 42 - 49206 43 - 49983 44 - 49997 45 - 50921 46 - 58382 47 - 75675 48 - 101680 49 - 131580 50 - 173150 51 - 206625 52 - 238820 53 - 282735

   54 - 323530 55 - 361025 56 - 393595 57 - 425283 58 - 440792 59 - 465040 60 - 504257 61 - 545446 62 - 565592 63 - 581471 1964 – 700000 to 740599 65 - 809177 66 - 833795 67 - 869000 68 - 928908 69 - G941900 70 - G957995 71 - G1018991 72 - G1099257

   73 - G1128731 74 - G1175000 75 - G1218700 76 - G1266000 77 - G1350000 78 - G1410000 79 - G1447000 80 - G1490709 81 - G1537134 82 - G1632872 83 - G1656883 84 - G1728457 85 - G1783276 86 - G1808838 87 - G1845122 88 - G1893903 89 - G1950701 90 - G1987984 91 - G2037985

   Records for rifles produced after 1992 have not been released. However you can call Winchester Firearms directly to inquire about the date of production on your rifle. Winchester can be reached directly at 800-333-3288.

   Using the information above you should be able to determine when your Model 70 was produced. And as such follow the chart below for part availability.

   • Pre '64 - Manufactured from 1935-1963
     

     Sorry, wood and mechanical parts are no longer available for this era of Model 70.

   • Post '64 - Manufactured from 1964-2006
     

     Mechanical parts and wood are available for these rifles produced by USRAC in New Haven, Ct..

   • New Production - Manufactured from 2008-Current
     

     Stocks are available, and some mechanical parts may interchange from the USRAC productions.

2. What bolt style do I have?

   Winchester made 3 different style bolts for the Winchester model 70. Push Feed, The Control Round Feed, and the Control Round Push Feed. Each of these bolt use different parts, so it is important to understand which bolt you have in your rifle. Use the figures below to determine which bolt you have.

   Figure 1 - PUSH FEED BOLT

   

   Figure 2 - PF BOLT FACE

   

   The PUSH FEED BOLT will have a small extractor and an ejector built into the bolt face as seen in figure 2. And as shown in Figure 1 a retaining pin for the ejector is visible from the outside. Also shown in figure 2 is that a push feed bolt has a completely inletted bolt face.

   Figure 3 - CONTROL ROUND FEED BOLT

   

   Figure 4 - CRF BOLT FACE

   

   The CONTROL ROUND FEED BOLT will have a long "Claw" type extractor (see figure 3) and is often referred to as a pre'64 style bolt. However the USRAC parts do not interchange with the pre'64 manufactured rifles. While the extractor is the most common way to identify this bolt style you can also look at the bolt face (figure 4) and see that it does not have a small extractor, and does not include an ejector.

   Figure 5 - CONTROL ROUND PUSH FEED BOLT

   

   Figure 6 - CRPF Bolt Face

   

   The CONTROL ROUND PUSH FEED BOLT is a combination of the previous two types of bolts. As seen in figure 5 there is not a long "claw" extractor. And in figure 6 you can see that the bolt uses the small style extractor, but the bolt face is not completely inletted.

3. What floor plate assembly do I need/have?

   Winchester produced 3 different types of Trigger Guard / Floor Plate Assemblies. The 1 piece, the 2 piece, and the DBM (detachable box magazine) versions. These are each in addition to having a blind magazine, which requires nothing accept a trigger guard. And each Model 70 stock requires the use of a specific floor plate assembly. To determine which floor plate assembly you may have, or to see which assembly you may need use the figures below.

   Figure 5 - One Piece Trigger Guard/Floor Plate Assembly

   

   The 1 piece trigger guard and floor plate assembly is exactly as it sounds. The trigger guard and the floor plate hinge are a solid piece of metal. With only the floor plate itself being a seperate component (figure 5). This assembly also only requires 2 action or trigger guard and floor plate screws.

   Figure 6 - Two Piece Trigger Guard/Floor Plate Assembly

   

   The 2 piece trigger guard and floor plate assembly is two completely independant components(figure 6). The trigger guard attaches itself seperately with two screws, while the floor plate attaches with yet another screw. and unlike the 1 piece assembly either the trigger guard or the floor plate can be replaced individually.

   Figure 7 - DBM (Detachable Box Magazine) Trigger Guard/Floor Plate Assembly

   

   The DBM or Detachable Box Magazine is only for use with the DBM magazines which you can view and purchase HERE. This is easily identified, by a lack of floor plate, and a magazine release. This assembly also only take two screws, and has a much more squared bracket where the floor plate hinge would normally be.

4. What type of action is my rifle?

   For our purposes, we will be discussing the USRAC production and later actions. These came in 3 basic types, and the depending upon the barrel you could then change the basic designation to a more specific type (i.e. long action verse long action magnum). While both use the same action, the magnum will have a different contour barrel and require a wider channel in the stock.

   The 3 basic types of actions are Super Short Action, Short Action, and Long Action. And outside of a few custom builds and specialty rifles, all your Model 70's made after 1964 should follow these rules. Use the Table and Figure below to determine your Winchester Model 70 action.

   Action Type	Screw Spacing	Common Calibers
   WSSM Action	6 3/8"	.223 WSSM, .243 WSSM, .25 WSSM
   Short Action	7"	.22-250 Rem, .243 Win, .308 Win
   Long Action	7 5/8"	.270 Win, .30-06 Spfld, 7mm Rem Mag, .300 Win Mag

   Figure 8 - Winchester Model 70 Receiver