Product Description
Description: FN 510 Tactical, 10mm FDE, (1) 15 & (1) 22 Round Magazines. This tactical FN 510 Series pistol includes significant design improvements over the FN 509 line of pistols but is chambered in 10mm. This flat dark earth semi-automatic striker-fired pistol features the patent-pending FN Low-Profile Optics Mounting System which accepts many commercially-available miniature red dot optics along with tritium night sights installed. The 510 Tactical comes standard with a 4.71" hammer-forged, stainless-steel barrel. The barrel is threaded in .578" x 28 and comes with a thread protector. Aggressive serrations on the slide provide positive grip along with the raised sight wings that give the user a textured ramp for racking the pistol against nearly any surface. This pistol ships in a premium zipper case with one 15 round and one 22 round magazines along with four MRD mounting plates and replacement backstrap.
The FN 510 Tactical carries an industry-first 22+1 rounds of 10mm Auto at the ready, giving you the stopping power you need to face any scenario. But holding all the power and capacity doesn't matter if you can't put all those rounds on target, so it's made for pinpoint control - red dot-ready, with a crisp trigger and unrivaled ergonomics. All the elements for a premium shooting experience are on-board, purpose-built into the most commanding defensive pistol available.
| CALIBER | 10mm |
| MAGAZINE CAPACITY | 15,22 |
| OPERATING SYSTEM | Striker Fired |
| ACTION TYPE | Semi-Auto |
| MAG MATERIAL | Steel |
| FRAME MATERIAL | Polymer |
| FRAME FINISH | FDE |
| ACCESSORY RAIL | MIL-STD-1913 |
| BARREL LENGTH | 4.71 in (120 mm) |
| BARREL MATERIAL | Cold Hammer Forged Steel |
| BARREL FINISH | Black |
| BARREL THREADS | .578" x 28 TPI |
| TWIST RATE | 1:16 RH |
| SLIDE MATERIAL | Forged Steel |
| SLIDE FINISH | FDE |
| SIGHTS | Tritium Co-Witness |
| OPTICS READY | YES - MRD Plates Included |
| OVERALL LENGTH | 8.3 in (211 mm) |
| WIDTH | 1.45 in (37 mm) |
| HEIGHT | 6 in (152 mm) |
| WEIGHT | 32 oz. (907 g) |
Includes:
- 22 Round Magazine (x1)
- 15 Round Magazine (x1)
- Premium Zipper Case
- Frame Backstraps (x2)
- MRD Mounting Plates (x4)
Mini Red Dot (MRD) Optics System
This pistol comes ready for the MRD system - a simple way to install a wide variety of mini red dot sights to the firearm. The pistol ships with 4 plates and associative hardware to ensure a secure mount of some of the the industry's top mini optic models. Below is the full MRD configuration line; this pistol does not ship with this entire line.
Manufacturer: FN America
Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number
PRODUCT SPECIFICATIONS:
- Barrel Length: 4-7/10"
- Barrel Thread Pitch: .578" x 28 TPI
- Brand: FN America
- Caliber: 10mm
- Finish / Color: Flat Dark Earth
- Firearm Type: Pistol
- Magazine Capacity: 22,15
- Models Fit: FN 510
- Type: Semi-Auto
Specifications
- Barrel Length: 4-7/10"
- Barrel Thread Pitch: .578" x 28 TPI
- Brand: FN America
- Caliber: 10mm
- Finish / Color: Flat Dark Earth
- Firearm Type: Pistol
- Magazine Capacity: 15,22
- Models Fit: FN 510
- Type: Semi-Auto
Rules & Regulations
Firearm Purchasing Policy
Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:
- Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
- Payment must be received via Credit Card
Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.
Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303
Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.
Shipping
WE WILL ONLY SHIP TO VALID FFL DEALERS.
Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:
- Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
- Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.
* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.
Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.
It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.
States with applied firearm restrictions:
Stripped lower receivers will NOT be shipped to the following states:
- Connecticut
- Illinois
- Massachusetts
Complete AR and AK receivers will NOT be shipped to the following states:
- California
- Connecticut
- Illinois
- Maryland
- Massachusetts
- New Jersey
- New York
- Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
- California (No "assault weapons" can be shipped.)
- Connecticut
- Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
- Maryland
- Massachusetts
- New Jersey
- New York
- Washington
Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.
Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.
Midwest Gun Works DOES NOT offer refunds in place of the magazines.
States with applied magazine restrictions:
- California - no magazines greater than 10 rounds
- Colorado - no magazines greater than 15 rounds
- Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
- Delaware - no magazines greater than 17 rounds.
- Hawaii - no pistol magazines greater than 10 rounds
- Illinois -
- No pistol magazines greater than 15 rounds
- No rifle magazines greater than 10 rounds
- Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
- Maryland - no magazines greater than 10 rounds
- Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- New Jersey - no magazines greater than 10 rounds
- New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- Rhode Island - no magazines greater than 10 rounds
- Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
- Washington -
- No magazines greater than 10 rounds
- No semi-auto shotgun fixed magazine greater than 7 rounds
- Washington D.C. - no magazines greater than 10 rounds
Exceptions:
- L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
- Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
- Not all of the states listed may have L.E.O. exemptions.
- Please contact us BEFORE placing your order.
- Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
- Midwest Gun Works does NOT make exceptions for this policy.
