Battle Arms AR-15 VERT PDW Lower Receiver, Less Trigger Group
Product Description
Description: Battle Arms AR-15 VERT PDW Lower Receiver, Less Trigger Group. Assembled using Battle Arms Development's own lower receiver & their VERT PDW stock system. Battle Arms Development set out to create the best forged lower receiver on the market at a level not done before in a production level for forged lowers. With lightweight engineering this stock system is only 19.5 oz! That's 30%-40% lighter that traditional PDW Stock Systems.
Specifications:
- Built-In PDW Stock System
- Ultra Compact Design - 4.75" Stock Length for Ultimate Concealment
- Proprietary Ultra Compact Buffer & Recoil Spring System - Compatible with MilSpec M16/AR15 Bolt Carrier
- Self Contained Buffer System - No Proprietary Bolt Carrier Required! Ability to "Shotgun" the Upper
- Monolithic Engineering - Receiver and PDW Stock Housing Precision CNC From Single Block of Billet 7075-T6 Aircraft Grade Aluminum for Superior Strength and Lightweight Design
- Interchangeable Cheek Rest for Versitility (Color Cheek Rest Options Available In the Future)
- Continous Cheek Weld for Ultimate Comfort and Stability/Accuracy
- Billet CNC Milled 7075-T6 Aluminum Buttstock
- Build-In, Integral QD Sling Point at Buttstock
- Heat Treat & Harden S7 Tool Steel .315" Dia. Guide Rods for Ultimate Impact Strength and Durability
- No Metal-To-Metal Contact between Guide Rods and Receiver Housing
- New Industry Standard in Smooth Stock Operation with Linear Motion Guide Bushings
- (4) Locking Stock Positions - Lockable in Both Direction. From 4.75" Fully Collapsed to 8.75" Fully Extended (measured from rear of receiver to end of stock)
- Dimpled Locking Stops with Stainless Steel Ball Bearing & S7 Tool Steel Locking Latch
- Ambidextrous Bolt Release (hardware included)
- Ambidextrous Magazine Release (hardware included)
- MIL-A-8625F, Type III, Class 2, Hard Anodized Flat Black Finish
- Compatible with TDP/Mil Standard AR Lower Receiver Parts (except for built-in proprietary components)
- Dimensional Accuracy Inspection
- All Sharp Edges De-Burred Sharp by Hand
- Pictograph Selector Markings Properly Marked for 90° Safety or BAD-ASS-ST / BAD-CASS-SA-ST Short Throw Ambidextrous Safety Selectors
- Receiver Safety Selector Hole & Internal Wall Machined with Relief Cut for Battle Arms Development "SHORT-THROW / REVERSIBLE" Ambidextrous Safety Selectors
- Multi Caliber Marking for Build Versatility
- Flared, Deep Beveled Magwell
- Easy in Install Set Screw Bolt Catch Pin (Pin Included)
- Captured Takedown Pin Detent Spring (Set Screw Included)
- Upper/Lower Receiver Tension Screw (Screw included)
- Integrated Trigger Guard
- All Components, material, and packaging made in the USA
- Laser Engraved Logo
- Patents Pending: Monolithic Design, Stock Locking Mechanism, and Ultra Compact Buffer & Recoil Spring System
Additional Components Include:
- BAD-CASS-SA-ST - Combat Ambidextrous Safety Selector - 50°/90° Reversible - Standard & Short Lever
- BAD-ATG - Battle Arms Development Adjustable Tactical Grip - 3 Grips-In-One - 3 Different Angles
- BAD-EMMR-L-B - Enhanced Modular Magazine Release - Large Finger Pad - Black (Large Finger Pad may be replaced by Medium Finger Pad Pending Inventory Levels)
- BAD-EPS - Enhanced Pin Set (Enhanced Pivot Pin & Enhanced Takedown Pin)
- BAD-EBC - Enhanced Bolt Catch - CNC from Billet Steel
- MilSpec Magazine Release & Spring
- Bolt Catch Detent & Spring
- Buffer Detent & Spring
Not Included:
- Trigger Group (Trigger, Hammer, Disconnector, Trigger Pin, Hammer Pin, Trigger Spring, Hammer Spring, Disconnector Spring)
Manufacturer: Battle Arms Development
WARNINGS:
- Will not work with solid filled 9mm bolt carrier
- VERT TM buffer system is designed for 5.56/.223 direct gas impingement system
- VERT TM buffer system can work with piston driven AR if the rear, internal dimensions of the bolt carrier is Mil-Spec
- Use of NICKLE BORON Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized
- Inside, rear cavity of the bolt carrier must be .625" diameter x .625" deep minimum to clear the buffer. Damage may occur if proper clearance isn't met.
Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number
Specifications
- Brand: Battle Arms Development (B.A.D.)
- Caliber: .223 Rem,5.56x45mm,.300 Blackout
- Finish / Color: Black
- Firearm Type: Rifle
- Material: Carbon Fiber,Aluminum
- Models Fit: AR-15
- Type: Semi-Auto
Rules & Regulations
Firearm Purchasing Policy
Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:
- Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
- Payment must be received via Credit Card
Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.
Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303
Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.
Shipping
WE WILL ONLY SHIP TO VALID FFL DEALERS.
Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:
- Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
- Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.
* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.
Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.
It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.
States with applied firearm restrictions:
Stripped lower receivers will NOT be shipped to the following states:
- Connecticut
- Illinois
- Massachusetts
Complete AR and AK receivers will NOT be shipped to the following states:
- California
- Connecticut
- Illinois
- Maryland
- Massachusetts
- New Jersey
- New York
- Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
- California (No "assault weapons" can be shipped.)
- Connecticut
- Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
- Maryland
- Massachusetts
- New Jersey
- New York
- Washington
Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.
Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.
Midwest Gun Works DOES NOT offer refunds in place of the magazines.
States with applied magazine restrictions:
- California - no magazines greater than 10 rounds
- Colorado - no magazines greater than 15 rounds
- Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
- Delaware - no magazines greater than 17 rounds.
- Hawaii - no pistol magazines greater than 10 rounds
- Illinois -
- No pistol magazines greater than 15 rounds
- No rifle magazines greater than 10 rounds
- Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
- Maryland - no magazines greater than 10 rounds
- Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- New Jersey - no magazines greater than 10 rounds
- New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- Rhode Island - no magazines greater than 10 rounds
- Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
- Washington -
- No magazines greater than 10 rounds
- No semi-auto shotgun fixed magazine greater than 7 rounds
- Washington D.C. - no magazines greater than 10 rounds
Exceptions:
- L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
- Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
- Not all of the states listed may have L.E.O. exemptions.
- Please contact us BEFORE placing your order.
- Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
- Midwest Gun Works does NOT make exceptions for this policy.