Beretta Micro-Core Field/Hunting Recoil Pad .59"

This replacement for my AL391 20 gage King Ranch model needed a new recoil pad. This one fits perfect in every way. I would gladly buy it again if needed.

This .59 thick Micro Pad fits perfect on my AL-391 King Ranch. The pad's back side that attaches to the wood has two round extensions that fit perfect into the round holes routed out into the wood. After tightening the screws I noticed a very small amount of light visible under the pad from the top side only. I took the pad off and used very coarse sandpaper to sand the bottom of the two extensions so as to make a better/closer fit into the wood stock. When I tightened the pad screws again into the stock the pad was flush with no visible light underneath the pad. I also purchased the .40 thick Micro pad to shorten the length of pull for my grandson. They work great.

We ordered this butt pad for the exact firearm it says it fits and as a gunstore owner and gunsmith, we know when something isn't right. This pad did NOT fit the firearm and when I contacted you for refund they are stating they will not fully refund. Besides that, when we got the job in, we ordered all the parts so when we got to the job we could install and return to customer so now even if we returned, it would be after 30 days! We stand behind EVERYTHING we do here whether 30 days or 30 months! We expected the same courtesy. We have ordered from you guys several times, but will now be cautious as to what we order in the future from you.

The pad fit great. Easy to install. Great oem product.

Easy Swap out. Beretta rep told me about the site and referred me too it. Quick turn sound on the order. Thx

The original pad on my A-400 started to deteriorate so I replaced it with this one. Now that I know these pads are soft I will store the shotgun muzzle down so it won't cause undue wear. I ordered the .59" because it's a little thinner than the original so with the extra clothing you ware while duck hunting it helps the gun to fit better.

Just what I wanted fit perfect

This is a good and standard recoil pad for the A400 Xtreme. It was smaller than the original. Only beef is Beretta putting in to cheap screws to keep it on. You would think in an $1800.00 Duck gun they would put in Stainless steel or marine Screws.

This recoil pad fit easily on my Beretta A400 Extreme. I have a 1/2 inch spacer on the gun and it made the gun fit better than the larger size up recoil pad. I could have went with the thicker recoil pad and removed the spacer but did not want to change the gun too significantly. Overall it was a good pad and made the gun look like it was straight from the factory.

This was a perfect replacement for the one hat came on my gun. The old one had deteriorated over the years. You may want to consider grabbing the replacement screws when doing this, Mine had seen better days.

Fit perfectly and was exactly what I was expecting. MGW was fast to deliver this. I will order from MGW again.