Gre-Tan Remington 700 & Model Seven Ejector Kit

Description: Gre-Tan Remington 700 & Model Seven Ejector Kit. Constructed from steel components, this small parts kit from Gre-Tan Rifles is made to fit both Remington Model 700 and Model Seven rifles chambered in long or short action calibers. The kit includes all the necessary parts for the complete ejection function of the rifle; an ejector, ejector pin and two ejector springs - one standard and one 1/3 the weight. The reduced eight ejector spring helps in preventing damage to case necks and throwing the brass beyond reach. Update your trusted long range Remington rifle with performance-grade components from Gre-Tan Rifles.

On a chambered cartridge the ejector has been made longer to help with pushing the case to the end of the bolt nose and to stop closer to the bolt face. On some bolts that have had the bolt face re-machined, you must make sure the ejector is flush, or just below the face. If not, you may not be able to close the bolt on cartridges, and will have to shorten the ejector stem to allow for the ejector to be flush or below the bolt face.

Kit Includes:

• Ejector
• Ejector Pin
• Standard Ejector Spring
• Soft Ejector Spring (1/3 weight of Standard Spring)

Manufacturer: Gre-Tan Rifles

Note: It is recommended that all Gre-Tan parts be installed by a qualified and trained gunsmith.

PRODUCT SPECIFICATIONS:

• Brand: Gre-Tan Rifles
• Caliber: .22-250 Rem,.220 Swift,.223 Rem,.243 Win,.308 Win,.300 Blackout,6mm Rem,7mm-08 Rem,.25-06 Rem,.257 Weatherby Mag,.260 Rem,.264 Win Mag,.270 Win,.280 Rem,.35 Whelen,.30-06 Springfield,.300 WSM
• Finish / Color: Stainless Steel,Unfinished
• Firearm Type: Rifle
• Material: Steel
• Models Fit: Remington Model 700,Remington Model Seven