Wilson Combat Sig Sauer P365XL Grip Module, No Manual Safety
Code: WC-365XL-SX
Ratings Snapshot
out of 5
5 (20)
4 (1)
3 (1)
2 (0)
1 (0)
Would recommend this product.
90.9%
$66.95
Product Description
•••••
Description: Wilson Combat Sig Sauer P365XL Grip Module, No Manual Safety. Engineered to optimize practical shooting and concealed carry potential, this grip module is designed for the Sig Sauer P365XL and P365X pistol without manual safety. This premium grip module improves shape, texture, and overall ergonomics which gives your P365XL a superb feel. This grip module comes with the grip, the magazine catch, the magazine release spring and the magazine release stop. Available in black, tan, gray, and green.
Features:
- Upgraded, high-cut 1911-style beavertail grip tang for smooth draws
- Modified backstrap shape for more natural pointing and enhanced grip and recoil control
- Undercut front-strap and reshaped, radiused trigger guard for the highest grip possible
- Improved grip traction and increased grip pattern coverage with Wilson Combat's exclusive Starburst grip pattern on the sides and aggressive texturing on the front and backstrap
- Internal Slots for Rod-style Tungsten Weights. Not compatible with X-Five Tungsten Weights
- Factory SIG-SAUER magazine release, spring, and lock included
- Compatible with all standard holsters
- 1.4 oz
- 6 1/8" long
- 3 1/8" tall
- 2" grip (front to back)
- 1 1/8" grip (side to side)
Light Compatability:
- Streamlight - TLR-6 Tactical Gun Light
- Streamlight - TLR-7 Sub Ultra-Compact Tactical Gun Light
- Crimson Trace LTG 772 Lightguard
- Crimson Trace LTG 422
- Sig Sauer Foxtrot365
- Surefire XSC Micro-Compact Handgun Light
- Any light compatible with Sig Factory 365 Modules
P365 Grip Removal/Replacement:
- Unload and clear your pistol.
- Remove the slide assembly and set it aside. Keep your takedown lever in the down position.
- Remove the rear frame pin from left to right with a small punch.
- Lift the chassis straight up from the rear at a forward angle out of the stock frame.
- Install supplied magazine catch, spring, and lock into the WCP365 Grip Module
- Reverse the process to install the chassis in to the new grip frame.
- After installation, ensure that the takedown lever is under spring tension and the slide safety lever isn't blocking the slide, reinstall the slide assembly and move the takedown lever into the locked position. Ensure that the slide lock and takedown lever have spring tension.
- Ensure that your pistol functions properly and your magazine drops cleanly after installation of the new grip frame prior to use.
| SKU | COLOR |
| WC-365XL-SB | Black |
| WC-365XL-ST | Tan |
| WC-365XL-SG | Gray |
| WC-365XL-SGN | Green |
Note: It is recommended that all Wilson Combat parts be installed by a qualified and trained gunsmith.
Manufacturer: Wilson Combat
PRODUCT SPECIFICATIONS:
- Brand: Wilson Combat
- Caliber: 9mm
- Finish / Color: Black,Tan,Gray,Green
- Firearm Type: Pistol
- Material: Polymer
- Models Fit: Sig Sauer P365
Specifications
•••••
- Brand: Wilson Combat
- Caliber: 9mm
- Finish / Color: Black,Tan,Gray,Green
- Firearm Type: Pistol
- Material: Polymer
- Models Fit: Sig Sauer P365
Customer Ratings & Reviews
•••••
Ratings Snapshot
out of 5
5 (20)
4 (1)
3 (1)
2 (0)
1 (0)
Would recommend this product.
90.9%
out of 5
5 (20)
4 (1)
3 (1)
2 (0)
1 (0)
Would recommend this product.
90.9%
Quality
Brent
Location: Texas
Date: February 12, 2024
Big improvement over the stock grip module. Adds a slight palm swell that gives full contact all the way around. Aggressive texture on the front and back give good grip, while the 'starburst' texture on the side panels doesn't rub when carrying. Hands down recommend
Recommended
Great product
Cam
Location: Ohio
Date: February 9, 2024
After installing on my P365XL, the entire feel of the gun has changed. I was heavily conflicted on whether I would like to change to the more premium OEM grip modules or try a third party company. Seems like everyone who had a Wilson liked it, so I bit the bullet and bought one. The new grip has totally made the entire gun more ergonomic and secure in my hand. Glad I made the purchase 100%, especially for the MSRP on this grip as compared to others.
Recommended
Best mod for your 365XL!
Iceman
Location: America!
Date: January 4, 2024
I absolutely love this grip! Best upgrade and best bang for the buck!!!
Recommended
Fits so well
Travis
Location: Nevada
Date: December 19, 2023
This grip module fits so well. The grip on the front and back is a bit coarse so I’ll probably sand it a bit but so good other than that.
Recommended
Nice upgrade to OEM
JC
Location: Arizona
Date: December 2, 2023
This module is an excellent upgrade from the OEM module. The grip checkering is very aggressive. The swell fills your palm better than the blockier OEM but doesn't sacrifice concealability, and the beavertail allows a higher grip. Overall it's a significant imorovement. The only drawback I found is that the grip checkering can be rough on some fabrics, especially if you're carrying concealed. Lighter synthetics mostly, cotton shirts seem to fare better.
Recommended
Wilson Grip Module
Rusty
Location: New Jersey
Date: November 1, 2023
Wow !!! What a game Changer for little dollars out lay. My big mutt hands had a problem grasping the sig 365x module.
The Wilson feels better in my hand and there a place for all my fingers. If you don’t upgrade your sig with this Wilson Combat grip Module your missing Out!!!
Recommended
BETTER GRIP
STEG
Location: FLORIDA
Date: October 31, 2023
THIS BETTOR GRIP ALLOWS ME TO GRIP THE PISTOL MORE FIRMLY THAN BEFORE. BETTER GRIP PROMOTES GREATER ABILITY TO SHOOT ACCURATELY
Recommended
WC Grip Module
Dave C
Location: Maryland
Date: August 1, 2023
Love my P365X, but the Standard grip module was too thin for my large hands.
The answer and fix to this, was the Wilson Combat grip module. This grip module made the firearm fit more comfortably in my hand.
Recommended
Better than stock
Bubs
Location: BFE East Tennessee
Date: July 25, 2023
I have yet to take this upgrade to the range but holding, dry firing and overall quality seems far above that of stock. The fore and aft section of the grip is exceptionally sharp and really digs in. It would NOT likely be comfortable for a day at the range but that’s not the point. I want to complain about the sharpness but when you figure it’s designed for a carry gun you’d use in an emergency and need to hang on to and not slip from a proper grip, I see the point. I have small hands and these really help fill the gaps in my grip. I expect they would be even better for larger hands where the stock grip is really lacking. Snazzy looking and the polymer feels stronger and more substantial than stock. Well worth it to me.
Recommended
Big improvement over micro sized OEM
Fgs77
Location: Orlando FL
Date: June 19, 2023
This couldn't have gone together any better. I can get a full pinky grip
The front strap in back strap were very sharp but I found out you can sand them down with 200 grit and then wash it and you won't have that white fibrous looking plastic. Now it's got a very secure grip but not digging into the skin.
Recommended
Great XL Grip
wmeesh
Location: Idaho
Date: June 14, 2023
1st, fits into my palm much nicer than the factory and control is much better when firing. The texture is the 2nd secret sauce for better handling. Great FDE color that compliments the dark metal and gives the P365XL a custom look.
Recommended
Perfect fit
BriGuy
Location: California
Date: January 26, 2023
Perfect texture to the grip to keep your hand from shifting. The size is ever so slightly larger which helps my hands to get that comfortable placement for accuracy every time. For me it is a must have.
Recommended
Saved my hands!
Walt@KnoxvilleTN
Location: TN
Date: October 17, 2022
First of all, the Wilson Combat Grip Module's (WCGM) Design provided a better grip without altering critical dimensions. I was able to keep on using my holster. The WCGM saved my hands when one of my reload ammo exploded in the chamber. The barrel breach and the slid kept the pistol together but blew out my magazine. WCGM maintained structural integrity and didn't shatter. The only damage from the explosion was two small cracks on the left and right side of grip! Zero damage to my hands.
Recommended
Review
Buyer
Location: Right here
Date: August 23, 2022
It’s a grip. Also, stop sending me unsolicited emails about product reviews.
Wilson Combat
BB
Location: Park Ridge , Illinois
Date: August 19, 2022
One of the best grip modules out there. I love the aggressive texture. Feels really good in the hand. Excellent !!!
The only thing better is the customer service at Midwest Gun Works !
great grip!
Corey
Location: Colorado
Date: August 15, 2022
Fits just like OEM, nice texturing on the grip, very comfortable. I would definitely would recommend it. Looks very good on the p365 slide in black. (I got the tan).
Recommended
Wilson Combat P365 XL grip module
BF
Location: Az
Date: May 25, 2022
This grip module is very nice.
It is comfortable and fills your hand better than the factory Sig grip or the Icarus aluminum grip. The texture is grippy, and not to rough for IWB carry (even against my puss gut)! It conceals well during appendix carry. Installs easily, and no need for an extended mag release because Wilson has designed the unit for accessible thumb purchase on the standard mag release.
I believe that I'm finished buying P365 grip modules.
I'm very satisfied.
Recommended
WC feel and look without the price .
JEB
Location: NC
Date: Apr18l 21, 2022
Great grip module. Looks great and ads a bit of thickness to an otherwise thin grip module.
Recommended
WC P365 Grip Module
Jack
Location: Alabama
Date: March 23, 2022
Great product. Perfect fit, function. Great purchase.
Recommended
Perfect Upgrade
Steve
Location: North Carolina
Date: March 22, 2022
I already loved the way the P365 XL fit in my hand but this made it perfect. It is a very comfortable but secure grip. I would highly recommend especially if you have a little larger hands. Item shipped quickly and was in perfect condition.
Recommended
