AK-Builder AK-47 Trigger Guard Riveting Jig

Description: AK-Builder AK-47 Trigger Guard Riveting Jig. This rivet tool from AK-Builder is a must-have for installing trigger guard rivets on your AK platform rifle/pistol with ease. The jig allows for the front four rivets to be installed at the same time and the pusher block features a notch to clear the center support if already installed to the AK's receiver. The back of the jig has an inlaid magnet to hold the rear support block; this allows for variations of receiver flats which may have alternate front trigger guard hole placements over traditional positioning. If you find yourself needing to properly install a new trigger guard to your AK, this tool makes the whole process easier and cleaner. Confidently work on your trusted AK firearm with quality tools from AK-Builder.

Parts Included:

• Rivet Jig Block
• Rear Support/Positioning Block
• Hardened Square Press Block
• Pusher Block w/ Notched for Clearance of Center Support

Capabilities:

• Installs the five trigger guard rivets.
• The front four rivets can be set at once and the rear will be done separately.
• The rear support block is removable to work with receiver flats that have the front four trigger guard holes in the wrong place as well as other receivers that have the correct spacing.
• Removing the rear block gives clearance when installing the rear rivet of the trigger guard that goes through the reinforcement plate.
• The square block that sets the front rivets is made of heat treated steel and may need to be ground to fit receivers that have the bump on the right side rail.
• This jig will work with receivers that already have the center support installed.

Manufacturer: AK-Builder

PRODUCT SPECIFICATIONS:

• Brand: AK-Builder
• Caliber: 7.62x39mm,5.45x39mm
• Finish / Color: Black
• Firearm Type: Rifle,Pistol
• Material: Steel
• Models Fit: AK-47,AK-74,AKM,AKS,RPK,AMD-65,Tantal,Zastava M70,Zastava M92
• Tool Type: Rivet Tool