Ballistic Advantage Stripped BA10 Lower Receiver
Product Description
Description: Ballistic Advantage Stripped BA10 Lower Receiver. This Ballistic Advantage BA10 lower receiver is manufactured from forged 7075-T6 aluminum in a way that gives it a billet look. The lower showcases a lightweight/solid design with a Mil-Spec black anodized finish and the pictograph selector markings accepts short-throw selectors as well as standard 90 degree safeties. The BA Enhanced stripped AR-10 lower has an integrated trigger guard and accepts standard AR-10 calibers like 7.62x51mm and .308 Win. A flared mag well is also featured for improved reloads. Build a high-performance, reliable, AR-10 rifle or pistol with this enhanced stripped receiver from Ballistic Advantage.
The Ballistic Advantage BA10 Lower Receiver helps you build a big-bore AR from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
Features:
- Material: Machined from 7075-T6 Forged Aluminum
- Finish: Matte Black Hard-Coat Anodized Mil-Spec 8625 Type 3 Class 2
- Markings: Cal Multi
- Selector: Safe / Fire
- Compatibility: Works with standard AR 308 components and magazines.
- Weight: 12.6 oz.
Enhanced Lower Improvements:
- Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver.
- Rear takedown pin detent hole is threaded for a 4-40 set screw
- Bolt catch is threaded for a screw pin (no roll pin needed)
- Selector markings will work with 45, 60 or 90 degree safety selectors
- Accepts Battle Arms Development short throw safety selectors, but will work with any standard selector
- Nylon tipped tensioning set screw
- No gap with aftermarket pistol grips
- BA Enhanced Lower Receiver is designed to pair perfectly with the BA Enhanced Upper Receiver, giving you a billet looking receiver set at a fraction of the billet price.
- New enhanced forging that gives the upper receiver a "billet look"
- Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.
- Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
- Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
- Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
- Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes.
- Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.
Manufacturer: Ballistic Advantage
Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number
PRODUCT SPECIFICATIONS:
- Brand: Ballistic Advantage
- Caliber: .308 Win,7.62x51mm
- Finish / Color: Black
- Firearm Type: Pistol,Rifle
- Material: Aluminum
- Models Fit: AR-10
- Type: Semi-Auto
Specifications
- Brand: Ballistic Advantage
- Caliber: .308 Win,7.62x51mm
- Finish / Color: Black
- Firearm Type: Pistol,Rifle
- Material: Aluminum
- Models Fit: AR-10
- Type: Semi-Auto
Rules & Regulations
Firearm Purchasing Policy
Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:
- Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
- Payment must be received via Credit Card
Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.
Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303
Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.
Shipping
WE WILL ONLY SHIP TO VALID FFL DEALERS.
Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:
- Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
- Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.
* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.
Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.
It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.
States with applied firearm restrictions:
Stripped lower receivers will NOT be shipped to the following states:
- Connecticut
- Illinois
- Massachusetts
Complete AR and AK receivers will NOT be shipped to the following states:
- California
- Connecticut
- Illinois
- Maryland
- Massachusetts
- New Jersey
- New York
- Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
- California (No "assault weapons" can be shipped.)
- Connecticut
- Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
- Maryland
- Massachusetts
- New Jersey
- New York
- Washington
Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.
Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.
Midwest Gun Works DOES NOT offer refunds in place of the magazines.
States with applied magazine restrictions:
- California - no magazines greater than 10 rounds
- Colorado - no magazines greater than 15 rounds
- Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
- Delaware - no magazines greater than 17 rounds.
- Hawaii - no pistol magazines greater than 10 rounds
- Illinois -
- No pistol magazines greater than 15 rounds
- No rifle magazines greater than 10 rounds
- Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
- Maryland - no magazines greater than 10 rounds
- Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- New Jersey - no magazines greater than 10 rounds
- New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- Rhode Island - no magazines greater than 10 rounds
- Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
- Washington -
- No magazines greater than 10 rounds
- No semi-auto shotgun fixed magazine greater than 7 rounds
- Washington D.C. - no magazines greater than 10 rounds
Exceptions:
- L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
- Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
- Not all of the states listed may have L.E.O. exemptions.
- Please contact us BEFORE placing your order.
- Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
- Midwest Gun Works does NOT make exceptions for this policy.
