Springfield Armory M1A Vortex Venom Red Dot Mount
Code: GE5076
Ratings Snapshot
out of 5
5
(19)
4
(1)
3
(2)
2
(0)
1
(1)
Would recommend this product.
78.3%
$89.00
Product Description
•••••
Description: Springfield Armory M1A Vortex Venom Red Dot Mount. This clip guide sight mount is constructed from a strong steel and polymer, carries black finishing, and is an OEM factory original part from Springfield Armory. This red dot mount is designed for the M1A series of rifles. The mount is designed to hold a Vortex Venom red dot sight and is installed on the clip guide on the top rear of the rifle. Slide on the mount, apply the set screw for proper retention, and place the mount shim on the mount. The Vortex Venom red dot sight will then perfectly fit on this mount. Springfield Armory has always been synonymous with quality. All Springfield parts and accessories are made to the highest standards in materials and workmanship. Take comfort in knowing that you have genuine Springfield Armory parts installed in your firearm, parts that are proudly made in the USA.
This sight mount may require minor fitting.
Kit Includes:
- Clip Guide Venom Red Dot Mount - x1
- Clip Guide Venom Red Dot Mount Shim - x1
- Clip Guide Venom Red Dot Mount Screw - x1
Manufacturer: Springfield Armory
PRODUCT SPECIFICATIONS:
- Brand: Springfield Armory
- Caliber: .308 Win,7.62x51mm
- Finish / Color: Black
- Firearm Type: Rifle
- Material: Polymer,Steel
- Models Fit: M1A
Specifications
•••••
- Brand: Springfield Armory
- Caliber: .308 Win,7.62x51mm
- Finish / Color: Black
- Firearm Type: Rifle
- Material: Polymer,Steel
- Models Fit: M1A
Customer Ratings & Reviews
•••••
Ratings Snapshot
out of 5
5
(19)
4
(1)
3
(2)
2
(0)
1
(1)
Would recommend this product.
78.3%
out of 5
5
(19)
4
(1)
3
(2)
2
(0)
1
(1)
Would recommend this product.
78.3%
Broken lens 1st time out
C
Location: AZ
Date: October 5, 2024
So I purchased this mount and the Vortex Venom 3 MOA not sure if an ejected shell hit it or what but my lens broke before I could sight it in very disappointing.
Great mount
Dnr
Location: California
Date: March 14, 2024
You must use a 3/32 pin punch from the bottom. The mount slides in one way only from Left to right means the left side of rifle, and it fits perfectly. It does not require any filing. Start off with a sliding it in with your hands, then use a nylon punch and finish off with a brass punch.
Recommended
great mount
mountain man
Location: oregon
Date: March 9, 2024
great mount option for the m1a, puts the red dot right where you need it
Recommended
Clean install, no deburring needed.
M1A Vortex Venom Red Dot Mount
Location: San Diego
Date: May 31, 2023
This was an easy install, just a few taps with brass mallet to seat all the way. The provided shim will cant the optic just right.
Recommended
Springfield Armory M1A Vortex Venom Red Dot Mount
Jerry
Location: Virginia
Date: May 9, 2023
Great product, fits my M1a Scout perfect.
Recommended
Firearms Enthusiast
Gudge
Location: Washington, DC
Date: May 5, 2023
Top quality as advertised.
GAME CHANGER
HannibalHannah
Location: Nashville Tn.
Date: March 16, 2023
This mounting option brings the M1a platform into the mainstream with the fastest, easiest sighting method ever, while still leaving the stock irons available if desired. Faster sight acquisition in any lighting conditions with basically no weight increase compared to a scope. Every M1 owner should have this.
Recommended
M1A socom red dot mount
Murphy
Location: TX
Date: March 8, 2023
Very easy to install, high-quality product if it's in stock buy it. It is the best
Recommended
Waited two years for this mount
Old Dude retired
Location: Wellington, Florida
Date: June 17, 2022
This mount is the one seen on all of the advertisements for the M1A. Every time I placed an order they were SOLD OUT. Finally, I can mount my Vortex Venom Red Dot.
Recommended
Springfield Armory M1A Vortex Venom Red Dot Mount
JohnO.
Location: NJ
Date: June 16, 2022
Waited awhile for this product to come back into stock. It was worth the wait.
Recommended
Disappointing product!
onetime
Location: New York
Date: June 15, 2022
Required extensive modification. Definitely not an "out of the box" product!!
Great product
Rotten
Location: NC
Date: July 10, 2021
I really like the mount. The only slight problem I had was it did require a lot of filing to get it to fit on the rifle.
M1A Venom Mount
Lance
Location: VA
Date: March 26, 2021
Great mount, just wish there were readily available instructions on how to remove stock stripper guide! Answer, it is held in place with tapered roll pin (I thought it was an allen wrench) that must be driven out from the bottom.
Recommended
Springfield Armory M1A Vortex Venom Red Dot Mount
Big B
Location: Mountain View, Arkansas
Date: February 22, 2021
The mount is great all around. Especially if you are getting older and have trouble seeing both sights, this is for you. This will completely revive your love for shooting and feeling confident in your abilities.
Recommended
M1A vortex venom red dot mount
Nuke
Location: Murrells Inlet, SC
Date: February 15, 2021
A+++++, gunsmith installed it, waiting to go to the range.
Recommended
Fitment Issue
MJ
Location: CA
Date: September 10, 2020
The product itself appears well made. Only challenge is dovetail cut on this mount is larger than the M1A clip guide mount - by a lot! Measured by caliper (in inches). On the larger side the mount is at .369 vs clip guide at .348 inches. On the smaller side .361 vs clip guide .316! A substantial difference.
So, the mount does not fit into the stock clip guide slot without some modification. Or maybe I just got one out of spec?? Reached out to MGW for suggestions on how to best fit and they replied "contact Springfield". That's going nowhere - still waiting for a reply from them over 10 days ago. Would only recommend this mount if you're prepared to have a gunsmith install it.
Red dot mount
Izzy
Location: Texas
Date: September 9, 2020
Low profile. Don’t need a cheek riser. Easy to install. Has a plastic insert to help level red dot.
Recommended
Well made & tight fit.
D. McArthur
Location: NV
Date: July 2, 2020
Bought this mount for my SOCOM 16. It’s an older model. The dovetail on the mount was bigger than the one on the receiver. I had to remove some material from it and had to use a hammer & brass punch to drive it in. So keep in mind that this mount may require minor fitting.
Recommended
Great Product and Fast Shipping
CPT Sparklefingers
Location: Richmond Hill GA
Date: July 2, 2020
Product arrived faster than expected and was as described. I couldn’t install it myself because my gunsmithing skills are atrocious but I love the product. Will have my lgs do the install.
Recommended
Perfect
Ron
Location: Florida
Date: May 19, 2020
Easy to install. Very nice finish. Great mount.
Recommended
