B&T USA Print-X Impuls OLS Modular 9mm Ti Suppressor, 1/2x28 Threads
Processing...

B&T USA Print-X Impuls OLS Modular 9mm Ti Suppressor, 1/2x28 Threads

Code: SD-IMPULS-OLS-M
Not Yet Rated | Write the First Review
$850.00

Sold Out
Sign up with your email to be notified when this product is back in stock!

Product Description

•••••

Description: B&T USA Print-X Impuls OLS Modular 9mm Ti Suppressor, 1/2x28 Threads. This OLS series Impuls suppressor from B&T is a 9mm can designed from titanium utilizing cutting-edge laser bed fusion techniques with features that make it ideal for tactical pistol setups where every gram on the loadout counts. The Print-X Impuls OLS Modular has an lengths of either 6.1 or 7.5 inches with the direct thread Impuls mount and fits 1-1/2" x 28 TPI barrel threads of 9mm pistols. The front portion of this suppressor can be removed and then replaced with the included end cap to achieve the smaller length if needed. With a diameter of 1.3" and a weight of 6.7/8.1 oz., this lightweight titanium suppressor gives your firearm the performance to achieve the best results when shooting in any scenario.

Renowned as one of the most trusted and widely used handgun suppressors worldwide, the B&T Impuls line has cemented its status with NATO special operations units and military forces across the globe. Why do so many manufacturers approve the Impuls series for use with their pistols? Because when they provide a suppressor with a handgun, any potential issues fall under the firearm manufacturer's responsibility-not the suppressor producer. As a result, most will only honor warranty claims if you're using a B&T Impuls suppressor.

CALIBER9mm
MATERIALTitanium
FINISHType II Anodized Gray
CAN DESIGNLaser Powder Bed Fusion (LPBF)
FULL LENGTH7.5 in.
FULL WEIGHT8.1 oz.
COMPACT LENGTH6.1 in.
COMPACT WEIGHT6.7 oz.
DIAMETER1.3 in.
CAN THREADS1-1/2" x 28 TPI
MOUNT1/2x28 Impuls

Features:

  • Ships with 1/2x28 Impuls Device - Compatible with many different pistol platforms, as long as they share the same thread.
  • The Gold Standard for Pistol Suppression - Built upon the legacy of B&T Impuls suppressors, trusted worldwide by elite forces and discerning civilian shooters alike.
  • Adjustable for Point of Impact - Dial in accuracy with ease, ensuring precise shots under any conditions.
  • Scalable Size - Effortlessly switch between compact and full-length configurations.

Manufacturer: B&T

Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number.

PRODUCT SPECIFICATIONS:

  • Barrel Thread Pitch: 1/2" x 28 TPI
  • Brand: B&T
  • Caliber: 9mm
  • Finish / Color: Gray
  • Firearm Type: Pistol
  • Material: Titanium
  • Product Length: 6-1/10",7-1/2"
  • Suppressor Attachment Method: Direct Thread

Specifications

•••••
  • Barrel Thread Pitch: 1/2" x 28 TPI
  • Brand: B&T
  • Caliber: 9mm
  • Finish / Color: Gray
  • Firearm Type: Pistol
  • Material: Titanium
  • Product Length: 6-1/10",7-1/2"
  • Suppressor Attachment Method: Direct Thread

Rules & Regulations

•••••

NFA Information

Massachusetts Minnesota Montana North Dakota Hawaii Idaho Washington Arizona California Colorado Nevada New Mexico Oregon Utah Wyoming Arkansas Iowa Kansas Missouri Nebraska Oklahoma South Dakota Louisiana Texas Connecticut New Hampshire Rhode Island Vermont Alabama Florida Georgia Mississippi South Carolina Illinois Indiana Kentucky North Carolina Ohio Tennessee Virginia Wisconsin West Virginia Delaware District of Columbia Maryland New Jersey New York Pennsylvania Maine Michigan Alaska
Suppressors, SBRs & SBSs Legal
Suppressors, SBRs & SBSs Not Legal
Suppressors Only
Suppressors & SBRs Only
SBRs Only
SBRs & SBSs Only

WHAT ARE NFA "CLASS III" ITEMS?
- Class III items include (but are not limited to): machine guns (MG), suppressors/silencers (SS), destructive devices (DD), all other weapons (AOW), short-barreled rifles (SBR) and short-barrel shotguns (SBS).

  • SBR: A rifle having a barrel length LESS than 16" and/or an overall length less than 26".
  • SBS: A shotgun having a barrel length LESS than 18" and/or an overall length less than 26".
  • Suppressor: Suppressor, Silencer, Can, Firearm Muffler are all legally the same thing. A Suppressor is a device which decreases the sound of the expelled round by more than 3 decibels. NOTHING silences a firearm - Some Suppressors make firearms sound quieter than others - very few make a firearm "Hollywood Quiet".
  • AOW Usually refers to a firearm that is manufactured to be disguised as something else:
    • Fountain Pen Guns or Walking Cane Guns are classified as AOW's.
    • A pistol having a vertical foregrip attached is classified as an AOW.
    • A smooth bore firearm (Shotguns have stocks), with a barrel less than 18", and came from the factory with only a pistol grip and has NEVER had a stock attached to it, is classified as an AOW Firearm.
    • The NFA transfer tax for an AOW is only $5 not the "normal" $200 tax stamp cost.

WHY WOULD ANYONE WANT A SUPPRESSOR?
- A silenced firearm is eminently more enjoyable to shoot than one without a suppressor. Suppressors generally increase the accuracy of a host firearm while reducing recoil and eliminating up to 90% of the muzzle signature. Shooters are able to concentrate more on breath control and trigger pull when they are not subjected to the fatigue and distraction of a deafening, bright, muzzle report. Beginning shooters are typically not intimidated when introduced to the shooting sports with a suppressed firearm and are able to easily hear instructions given to them by trainers as the report of a host firearm is reduced to below the OSHA guideline level for hearing damage. Suppressed firearms are also less likely to disturb any people, livestock, or wildlife that may be in close proximity to where you shoot.

YES, CLASS III ITEMS ARE LEGAL, AND THEY ARE EASY TO OBTAIN.
- No, you do not need a license to purchase Class III items but you do have to pay a one-time $200 tax for each Class III item you purchase. You also have to live in a state where Class III items are legal and have to meet certain criteria to be eligible to own one.

- Determine whether or not your state allows you to own a Class III item. Class III items are legal but they are regulated on a per-state basis. However, the National Firearms Act (NFA) branch of the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) ultimately controls any transfers, and all Class III items are registered by this branch. Individuals, corporations, and trusts can legally purchase and possess Class III items in 44 states. Some states differ with which type of Class III items may be owned. However, if you are a dealer, manufacturer, peace officer, or a law enforcement agency or other government agency, there are additional states where you can own a Class III item.

WHO CAN OWN A CLASS III ITEM?
- Anyone who is a legal U.S. resident, 21 years of age and older, a non-felon, and lives in one of the states that allow private ownership of a Class III item. All Class III items are illegal in the following states: CA, HI, IL, NJ, NY, RI & Washington D.C.

I QUALIFY PERSONALLY AND GEOGRAPHICALLY TO OWN A CLASS III ITEM, NOW WHAT?

  1. Choose a product.
  2. Locate a Class III dealer in your state.
  3. After the monetary transaction takes place of the Class III item, it will be assigned to you and separated from the rest of the inventory, ensuring that you have a specific product serial number for your ATF Form 4.
  4. Once you have an assigned product serial number, the Class III dealer will then give you the ATF Form 4 (5320.4), Application for Tax Paid Transfer and Registration of Firearm, in duplicate with the serial number of the product filled out in the appropriate sections. You must fill out the rest of the form in duplicate. You can download the form 4 HERE.
  5. You will send in a $200 check or money order with the completed application, along with a recent photo and fingerprint cards.

STEPS TO COMPLETING YOUR FORM 4 AS AN INDIVIDUAL

  1. Obtain the ATF Form 4 (5320.4) (Application for Tax Paid Transfer and Registration of Firearm) from your dealer in duplicate. Some information the form requires is your name and address, the model of the Class III item you are purchasing, the overall length of the Class III item, the caliber or gauge of the Class III item, the serial number of the Class III item, and the manufacturer's information. Make sure the dealer signs the appropriate fields. Remember to complete all information in duplicate.
  2. Fill out the required information on the front of the form, including your name and address. Complete the back by answering the questions and stating the reason you are acquiring the Class III item. Sign and date the back of the form. Again, remember to complete all information in duplicate.
  3. Affix a recent color passport-sized photograph of yourself on the back of each copy of the form.
  4. Acquire a signature of the chief law enforcement officer of your county or your local sheriff. Don't let this step scare you; this is a routine request. If you feel that your police chief or sheriff will not sign the Form 4 because of personal or political concerns with the Second Amendment, do not worry. You can bypass them by purchasing the Class III item via a Limited Liability Company (LLC), corporation, or under a trust.
  5. While you are at the station obtaining the required signature, ink up your fingers and get two copies of FBI fingerprint cards (FBI Form FD-258) that you will send in with the two duplicates of Form 4.
  6. Place both completed copies of Form 4, the two copies of FBI fingerprint cards, and the completed Certification of Compliance form in an envelope, along with a check or money order (payable to Bureau of Alcohol, Tobacco, Firearms, and Explosives) for $200 and mail to the address listed on Form 4. We advise that you use a check and not a money order so you can see when the ATF cashes your check. This is a great way to confirm if the form actually arrived and is being processed. Otherwise, you may just be waiting for an extended period of time for approval, when, in fact, your paperwork never arrived.
  7. After the ATF approves Form 4, they will put a stamp on one of the two copies you sent them and then send it to the dealer where you purchased the Class III item. The dealer will then notify you that the paperwork has returned and that the Class III item is ready for pickup.

Close

Customer Ratings & Reviews

•••••

Be the first to rate this item!

Write Review